How to Refinish Wood Trim In Home

If you are in the process of refinishing wood trim in your home, there are some special steps that you will have to take in order for the refinishing to last. The first step is to strip the old varnish or paint from the trim. You should use a chemical stripper if this is your first time doing this, but it is not necessary. Stripping off the old coating is actually easier if you use a power washer than it is if you use a brush.

Once you have stripped off the old coating, it will be easier to get into the small nooks and crannies where the wood trim meets the walls. The easiest way to do this is to use an orbital sander. You may find that sanding in the direction of the grain of the wood trim will help to give you a nice smooth finish.

Come visit our website:maderalocal.com

The next step in learning how to refinish wood trim in the home is sanding. The depth of the sanding should be one inch lower than the thickness of the wood trim. This will give the wood a finished look without dulling it out. Start sanding in the direction of the wood’s natural line. As long as you do not go too deep, you will not damage the wood or the underlying paint. You may want to use a light spray of paint to get a smooth finish before or after sanding.

After the sanding is done, you will want to move on to the opposite side of the trim. Do the same thing but reverse the direction. In this case, the sanding should be done in the middle. Now you can start to paint in the color you want. You may want to make sure that you have primed the trim before painting so that it will be even and more even when dry.

Some people are a little hesitant about refinishing trim because they think that the process is time consuming and difficult. The fact is, it really isn’t. It is a simple process that only takes a few minutes to complete. Once you learn how to refinish trim in home, you may even decide to refinish your whole house at one time. While it may take longer, it will also be less expensive. The amount you spend for the project will be less than what you would pay for new furniture.

If you want a specific kind of look for your trim, you should take your time to find the right type. There are lots of different styles available, so you shouldn’t have any problems coming up with something that looks good. It might even inspire you to design the trim of your own home. In fact, many people end up doing this to get a unique look.

You need to start by sanding off all the rough spots from the trim. Next, you should scrape off the old varnish and any protective coating you might have applied. This will help you to have a clean trim. While you are sanding off the old finish, you should also be sure to keep an eye on the junctures where the wood trim meets the wood board.

When you are done sanding off the old finish, you can remove the old trim and put it aside. You should then take the new trim and cut it exactly how you want it, although you should keep in mind that there is no need to cut the board exactly parallel to the original border. The best thing to do is to make a small allowance in the middle of the board. When you want to refinish wood trim in the home, you may use a mitre saw. It is important to use the right tool for the job. If you are unsure about how to refinish wood trim in the home, you can take some time to browse the Internet and get some refinishing tips.

Leave a Reply

Your email address will not be published. Required fields are marked *

Scottdewoody.com